REVISED PLANSTHIS PLAN SET IS PROPRIETARY AND CONFIDENTIAL INFORMATION OF THE BANK AND THE USE OF THIS DESIGN IS PROHIBITED WITHOUT THE EXPRESS PERMISSION OF THE BANK
NOTE: THIS LIGHTING PLAN ILLUSTRATES ILLUMINATION LEVELS CALCULATED FROM LABORATORY DATA UNDER
CONTROLLED CONDITIONS IN ACCORDANCE WITH ILLUMINATING ENGINEERING SOCIETY OF NORTH AMERICA (IESNA)
APPROVED METHODS. ACTUAL SITE ILLUMINATION LEVELS AND PERFORMANCE OF LUMINARIES MAY VARY DUE TO
VARIATIONS IN WEATHER, ELECTRICAL VOLTAGE, TOLERANCE IN LAMPS AND OTHER RELATED VARIABLE FIELD
CONDITIONS.
SCALE: 1/2" = 1'-0"COVER
SITE PLAN
VICINITY MAP
DESCRIPTIONREVISION
NO.
1
2
3
REVISED
BY
KRM
DESIGN BY:
REVIEWED BY:
DRAWN BY:
APPROVED BY:
KRM
BLUE
GREEN
ORANGE
= NEW FIXTURE
= EXISTING FIXTURE LOCATION TO BE REPLACED
= EXISTING FIXTURE TO REMAIN
= FIXTURE TO BE REMOVEDTURQUOISE
PL = PROPERTY LINE BASED ON COUNTY APPRAISAL
INFORMATION
PINK = REPLACE WITH NEW POLE AT NEW HEIGHT
= INDICATES NEW SECURITY FENCE
3856 Falmouth Rd
MA6-221
3856 Falmouth Rd
Marstons Mills, MA
RCSJDH
AWD
v2 211108
âBank of America
www.gmr1.com
Office: (972) 771-6038
1629 Smirl Drive, Suite 200, Heath, Texas 75032
MASSACHUSETTS ROUTE 28
EXTERIOR LIGHTING PROGRAM
âBank of America
CONTRACTOR RESPONSIBILITY NOTES:
1.CONTRACTOR SHALL BE RESPONSIBLE FOR PERMITTING, INCLUDING COORDINATION WITH THE LOCAL JURISDICTION AND ANY
ASSOCIATED PERMIT FEES OR PROCESSING. CONTRACTOR SHALL NOTIFY GMR UPON RECEIPT OF PERMIT.
2.CONTRACTOR SHALL BE RESPONSIBLE FOR ALL PERMITTING DOCUMENTS THAT ARE NOT INCLUDED IN THE LIGHTING DESIGN
PACKAGE. THESE INCLUDE, BUT ARE NOT LIMITED TO, STAMPED ELECTRICAL DRAWINGS, STAMPED POLE BASE DRAWINGS, AND
PROFESSIONAL SURVEYS.
3.SHOULD STAMPED PHOTOMETRIC DRAWINGS BE REQUIRED, CONTRACTOR SHALL ENGAGE LOCAL ENGINEER OR LIGHTING
DESIGNER AS REQUIRED TO PROVIDE STAMP ON GMR PHOTOMETRIC DESIGN DOCUMENTS.
4.CONTRACTOR SHALL PROVIDE THE BANKING CENTER NOTIFICATION AT LEAST ONE WEEK IN ADVANCE OF VISITING SITES OR
STARTING WORK.
5.CONTRACTOR SHALL VERIFY VOLTAGE REQUIREMENTS FOR FIXTURES PRIOR TO PLACEMENT OF FIXTURE ORDERS.
6.CONTRACTOR TO VERIFY LIGHTING CONTROLS PRIOR TO BEGINNING CONSTRUCTION. SEE LIGHTING CONTROL NOTES.
7.CONTRACTOR SHALL RECEIVE FORMAL APPROVAL FROM GMR ON ANY FIXTURE MODIFICATIONS OR VARIATIONS FROM THE
LUMINAIRE SCHEDULE.
8.CONTRACTOR SHALL VERIFY EXISTING AND PROPOSED FIXTURE MOUNTING CONDITIONS IN FIELD. ANY SPECIAL MOUNTING
HARDWARE NEEDED FOR PROPOSED FIXTURES SHALL BE THE RESPONSIBILITY OF THE CONTRACTOR.
9.CONTRACTOR SHALL SUPPLY ALL NEW LIGHT POLES. NEW LIGHT POLES SHALL MATCH EXISTING CONDITIONS ON SITE FOR POLE
TYPE AND PAINT COLOR.
10.CONTRACTOR SHALL ORDER ALL FIXTURES FROM BORDER STATES IN ACCORDANCE WITH BANK OF AMERICA NATIONAL ACCOUNT.
CONTACT NATIONAL ACCOUNT QUOTES DEPARTMENT AT BOA@BORDERSTATES.COM OR 704-372-3040.
11.CONTRACTOR SHALL PERFORM ALL NECESSARY PATCHING OR REPAINTING FOR ADDED, REMOVED, OR REPLACED FIXTURES.
12.CONTRACTOR SHALL REPAIR ANY DISTURBED AREAS BACK TO EXISTING CONDITION INCLUDING PAVED AREAS, LANDSCAPED AREAS,
ETC.
13.CONTRACTOR SHALL VERIFY AND DOCUMENT COMPLETED WORK DURING NIGHT HOURS. ALL FIXTURES MUST BE FUNCTIONAL
DURING NIGHT HOURS PRIOR TO SCHEDULING A FINAL SURVEY WITH GMR.
14.CONTRACTOR SHALL PROVIDE BEFORE AND AFTER NIGHT TIME PHOTOS OF THE SITE.
15.CONTRACTOR SHALL UTILIZE THE “BOA ELP INCENTIVE SITE SURVEY FORM” TO DOCUMENT THE EXACT DETAILS OF EACH FIXTURE
BEING REMOVED FOR REBATE AND ENERGY SAVINGS CALCULATION PURPOSES.
16.CONTRACTOR SHALL RECEIVE A PUNCHLIST FROM GMR UPON FINAL SURVEY FOR ANY REMAINING ITEMS TO BE COMPLETED.
CONTROLS & ADDITIONAL NOTES:
LIGHTING CONTROL NOTES:
THE CONTRACTOR SHALL VERIFY THE CONTROLS FOR ALL EXTERIOR LIGHTING AND ATM/AHD INTERIOR LOBBIES ON THE SITE (EXCLUDING
SIGNAGE) AND ADJUST ACCORDING TO THE FOLLOWING:
·IC3 CONTROL
CONTRACTOR SHALL VERIFY THAT EXTERIOR LIGHTING CIRCUITS ARE CONTROLLED BY THE CORRECT IC3 CIRCUIT. WHERE EXTERIOR
LIGHTING IS INCLUDED ON CONTROL CIRCUITS FOR INTERIOR SYSTEMS, INTERIOR LIGHTING, OR EXTERIOR SIGNAGE, CONTRACTOR
SHALL ADJUST EXTERIOR LIGHTING TO THE CORRECT CONTROL CIRCUIT AS REQUIRED.
·PHOTOCELL CONTROL:
CONTRACTOR SHALL REPLACE EXISTING PHOTOCELLS WITH NEW AND INSTALL IN A LOCATION BEST SUITED TO PROVIDE
APPROPRIATE LIGHT EXPOSURE SUCH THAT EXTERIOR LIGHTS ARE ON DURING DARKNESS.
·TIME CLOCK CONTROL:
CONTRACTOR SHALL VERIFY LOCATION OF TIME CLOCK. IF TIME CLOCK IS IN ELECTRICAL ROOM ALONG WITH IC3 CONTROLS,
CONTRACTOR SHALL ADJUST CIRCUIT TO BE CONTROLLED BY IC3 EXTERIOR LIGHTING CONTROLS. IF TIME CLOCK IS IN A REMOTE
LOCATION NOT IN CLOSE PROXIMITY TO THE IC3 CONTROLS, CONTRACTOR SHALL VERIFY TIME CLOCK IS SET PROPERLY AND LEAVE
CIRCUIT ON TIME CLOCK CONTROL.
·MANUAL CONTROL:
CONTRACTOR SHALL VERIFY THAT NO EXTERIOR LIGHTING IS CONTROLLED MANUALLY. IF ANY EXTERIOR LIGHTING IS ON A
MANUALLY CONTROLLED CIRCUIT, CONTRACTOR SHALL ADJUST TO BE CONTROLLED BY PHOTOCELL OR IC3, WHICHEVER IS MOST
ECONOMICALLY ACCOMPLISHED.
ADDITIONAL CONTRACTOR NOTES:
CONSTRUCTION COMPLETION VERIFICATION
UPON COMPLETION OF THE WORK, THE CONTRACTOR SHALL PROVIDE VERIFICATION IN WRITING TO THE BANK OF AMERICA PJM
THAT ALL WORK IS COMPLETE ACCORDING TO THE CONSTRUCTION DOCUMENTS, AND THAT ALL EXTERIOR LIGHTING IS
FUNCTIONING DURING NIGHTTIME HOURS. COMPLETION PHOTOS, TAKEN AT NIGHT, SHALL BE PROVIDED IN THE FOLLOWING
FORMAT:
PROVIDE A SINGLE DOCUMENT CONTAINING THE FOLLOWING:
·SITE PHOTOS FROM ALL SIDES OF BUILDING
·MINIMUM OF 3 PHOTOS OF EACH COMPLIANCE AREA (ATM(S), AFTER-HOUR DEPOSITORIES, ASSOCIATE ENTRY) FROM DIFFERENT
ANGLES
·MINIMUM OF 2 PHOTOS OF ALL NON-COMPLIANCE AREAS FROM DIFFERENT ANGLES
FIXTURE CLARIFICATION NOTES:
1.OUT OF SCOPE - EXISTING FIXTURES TO REMAIN ON SITE WITHOUT MODIFICATION. NO ACTION REQUIRED UNLESS
NOTED OTHERWISE.
2.REMOVE AND PATCH - EXISTING FIXTURES TO BE FULLY REMOVED AND ANY PAINTING, PATCHING OR ELECTRICAL WORK
NEEDED IS TO BE ASSESSED AND PERFORMED BY CONTRACTOR.
3.REPLACE EXISTING FIXTURE - EXISTING FIXTURE TO BE FULLY REMOVED AND REPLACED IN THE SAME LOCATION WITH A
NEW FIXTURE. CONTRACTOR TO VERIFY IF POLE AND/OR POLE BASE IS SUFFICIENT FOR THE NEW FIXTURES. ANY
PAINTING, PATCHING OR ELECTRICAL WORK NEEDED IS TO BE ASSESSED AND PERFORMED BY CONTRACTOR.
4.ADD NEW FIXTURE - NEW FIXTURES TO BE ADDED. ANY PAINTING, PATCHING OR ELECTRICAL WORK NEEDED TO BE
ASSESSED AND PERFORMED BY CONTRACTOR.
5.ADD NEW POLE & FIXTURE - A NEW POLE AND FIXTURE TO BE ADDED. CONTRACTOR TO SPECIFY POLE TO MATCH
EXISTING STYLE AND COLOR AND, IF NOT PROVIDED, POLE BASE DATA FOR NEW POLE LOCATIONS. CONTRACTOR TO
VERIFY IF POLE AND POLE BASE IS SUFFICIENT FOR THE HEIGHT, LOCATION AND FIXTURE SPECIFIED.
6.GMR DOES NOT SPECIFY MOUNTING HARDWARE FOR ANY SPECIFIED FIXTURES. CONTRACTOR IS TO WORK WITH
DISTRIBUTOR AND/OR MANUFACTURER ON A CASE BY CASE BASIS TO IDENTIFY AND ORDER REQUIRED MOUNTING
HARDWARE.
7.CONTRACTOR TO VERIFY WHETHER EXISTING WIRING LOCATIONS OR THE ADDITION OF WIRING FOR NEW FIXTURE
LOCATIONS IS SUFFICIENT FOR THE DESIGNATED FIXTURE LOCATION.
8.CONTRACTOR TO SPECIFY POLE COLOR AND TYPE PRIOR TO ORDERING.
9.ALL FIXTURES ARE ASSUMED BRONZE IN COLOR UNLESS NOTED OTHERWISE IN THE LUMINAIRE SCHEDULE.
CONTRACTOR TO CONFIRM PRIOR TO ORDERING.
GENERAL NOTES:
1.EXISTING CONDITIONS SHOWN ON THE DRAWINGS ARE BASED ON A LIMITED AMOUNT OF INFORMATION AVAILABLE TO
THE ENGINEER. ALL SUCH CONDITIONS SHALL BE VERIFIED BY THE CONTRACTOR PRIOR TO SUBMITTING THE BID AND
ADJUSTED IF NECESSARY. NO ADDITIONAL COMPENSATION SHALL BE GRANTED AFTER AWARDING A BID FOR ANY
EQUIPMENT, MATERIAL OR LABOR REQUIRED TO REWORK OR OTHERWISE MODIFY EXISTING CONDITIONS.
2.THIS LIGHTING DESIGN IS BASED ON A COMBINATION OF STATE STANDARDS, THE BANK'S CURRENT SECURITY POLICY
FOR EXTERIOR ATM AND AFTER-HOUR DEPOSITORIES AND BANK GUIDELINES FOR NON-SECURITY COMPLIANCE ZONES.
3.TRIM ALL TREES/LANDSCAPING TO MINIMIZE IMPEDING LIGHT FROM ANY LIGHT FIXTURES THAT IMPACT THE 60' RADIUS
AROUND ALL ATMS AND A RADIUS OF 50' AROUND ALL AFTER-HOUR DEPOSITORIES. CONSIDERATION MUST BE GIVEN
TO TREES/LANDSCAPING IN A STATE OF FULL FOLIAGE/BLOOM AND FUTURE GROWTH. ALL LANDSCAPING WORK WILL
BE PERFORMED BY OTHERS WITH A SEPARATE PERMIT (IF REQUIRED).
4.ALL MOUNTING HEIGHTS ARE INTENDED TO THE BOTTOM OF THE FIXTURE.
5.CONTRACTOR TO FIELD VERIFY FIXTURE PLACEMENT DIMENSIONS PRIOR TO CONSTRUCTION.
6.DIMENSIONING PROVIDED IS FOR PROPOSED FIXTURE LOCATIONS ONLY, UNLESS OTHERWISE NOTED ON THE DRAWING.
7.THE CONTRACTOR SHALL ATTEMPT TO ELIMINATE THE USE OF EXPOSED CONDUIT WHERE POSSIBLE. IF EXPOSED
CONDUIT IS NECESSARY, THE CONTRACTOR SHALL VERIFY USE WITH PROJECT MANAGER.
8.ALL EXISTING LIGHTS WILL BE REPLACED WITH LED LIGHTS AND ALL PROPOSED LIGHTS WILL ALSO BE LED, UNLESS
OTHERWISE NOTED.
9.ALL FIXTURES ARE TO BE MOUNTED ABOVE FINISH GRADE.
10.UNLESS OTHERWISE NOTED, MATCH EXISTING POLE BASES.
SITE ABBREVIATIONS:
PL = PROPERTY LINE
AFG = ABOVE FINISHED GRADE
Fc = FOOTCANDLE
CBO = CONTROLLED BY OTHERS
AHD = AFTER HOUR DEPOSITORY
YA3
YA1
YA2
YE1 YE1
YE2
YE2
YE2
Y1
Y2DV1
EK1
AR1
YA4
YA4
LOBBY/ASSOCIATE ENTRY
ATM1
AHD ATM2
PL PL PL PL PL PL
YI1
SG1
Y3
EK2
Y3 Y3
YC1
SG1
SL1
SG1Y3
AT1 (NEW POLE)AT1 (NEW POLE)
SJ1
SJ1
LUMINAIRE SCHEDULE **SEE FIXTURE CLARIFICATION NOTE #9 (NP) = NEW POLE (CBO) CONTROLLED BY OTHERS
SYMBOL QTY LABEL FIXTURE ARRANGEMENT TOTAL FIXTURE COUNT NEW POLE COUNT FIXTURE TYPE / MOUNTING / MANUFACTURER BUG RATING MOUNTING HEIGHT MOUNTING ACCESSORIES NOTES
1 AR1 SINGLE (AR) ARE-EDG-5M-DA-10-E-UL-BZ-525-40K / POLE MOUNT / CREE MATCH EXISTING
2 AT1 (NEW POLE)SINGLE (AT) ARE-EDG-5M-DA-14-E-UL-BZ-525-40K / POLE MOUNT / CREE 18' AFG
3 DV1 SINGLE (DV) LR6X-10L-40K / CANOPY MOUNT / CREE MATCH EXISTING
1 EK1 SINGLE (EK) ZR22-40L-840-10V5-UNV / RECESSED CANOPY MOUNT / CREE MATCH EXISTING
1 EK2 SINGLE (EK) ZR22-40L-840-10V5-UNV / RECESSED CANOPY MOUNT / CREE 9' - 6'' AFG
3 SG1 SINGLE (SG) SEC-EDG-3M-WM-04-E-UL-BZ-350-40K / WALL MOUNT / CREE 12' AFG
2 SJ1 SINGLE (SJ) SEC-EDG-4M-WM-02-E-UL-BZ-700-40K / WALL MOUNT / CREE 8' AFG
1 SL1 SINGLE (SL) SEC-EDG-4M-WM-04-E-UL-BZ-700-40K / WALL MOUNT / CREE 12' AFG
1 Y1 DOUBLE (2@90°)EXISTING SPOT LIGHT -
1 Y2 SINGLE EXISTING FLAG FLOOD LIGHT -
4 Y3 SINGLE EXISTING DECORATIVE WALL LIGHT -
1 YA1 SINGLE EXISTING POLE FIXTURE -
1 YA2 SINGLE EXISTING POLE FIXTURE -
1 YA3 DOUBLE (2@180°)EXISTING POLE FIXTURE -
2 YA4 SINGLE EXISTING LED POLE LIGHT -
1 YC1 SINGLE EXISTING FLOOD FIXTURE -
2 YE1 SINGLE EXISTING CANOPY FIXTURE -
3 YE2 SINGLE EXISTING CANOPY FIXTURE -
1 YI1 SINGLE EXISTING WALL FIXTURE -
** CONTRACTOR TO VERIFY MOUNTING ACCESSORIES BEFORE ORDERING**
1
2
3
1
1
3
2
1
2
1
4
1
1
2
2
1
2
3
1
-
2
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
B4-U0-G3
B5-U0-G3
B1-U0-G0
B2-U1-G1
B2-U1-G1
B2-U0-G2
B1-U0-G1
B2-U0-G2
-
-
-
-
-
-
-
-
-
-
-
-
-
C6-LSA
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
REPLACE EXISTING FIXTURE
ADD NEW POLE AND FIXTURE
REPLACE EXISTING FIXTURE
REPLACE EXISTING FIXTURE
ADD NEW FIXTURE - MATCH EXISTING CANOPY HEIGHT
ADD NEW FIXTURE
ADD NEW FIXTURE
ADD NEW FIXTURE
OUT OF SCOPE
OUT OF SCOPE
OUT OF SCOPE
OUT OF SCOPE
OUT OF SCOPE
OUT OF SCOPE
OUT OF SCOPE
OUT OF SCOPE
OUT OF SCOPE
OUT OF SCOPE
OUT OF SCOPE
APPROVAL PRIOR TO INSTALLATION. BANK MUST HAVE LANDLORD AGREE
TO LEAVE FIXTURES ON ALL HOURS OF DARKNESS.
LIGHTING IS REQUIRED FOR COMPLIANCE AND WILL REQUIRE LANDLORD1.
SITE NOTES:
EXISTING POLES - SQUARE - STEEL
EXISTING POLE BASES - 3'
EXISTING DRIVE THRU CEILING - HARD
2.
3.
1.
EXISTING CONDITIONS:P:\2021\Bank of America\Design\2021 ELP\MA\Marstons Mills (MA6-221) - 3856 Falmouth Rd\Active\CAD - MA6-221 - V2 - 211108 - RCS.dwg, 11/9/2021 9:54:15 AM, AutoCAD PDF (General Documentation).pc3
LU-1
SITE DETAILS
N.T.S.
NOTES:
1.READINGS ARE MEASURED AT 36" (3') ABOVE GRADE.
NOTES:
1.THE SCOPE OF WORK FOR THIS PROJECT IS LIMITED TO EXTERIOR LIGHTING RENOVATIONS AS
SHOWN ON THE PLANS.
2.REFERENCE THE LUMINAIRE SCHEDULE FOR ADDITIONAL LIGHT FIXTURE INFORMATION.
DESCRIPTIONREVISION
NO.
1
2
3
REVISED
BY
KRM
DESIGN BY:
REVIEWED BY:
DRAWN BY:
APPROVED BY:
KRM
BLUE
GREEN
ORANGE
= NEW FIXTURE
= EXISTING FIXTURE LOCATION TO BE REPLACED
= EXISTING FIXTURE TO REMAIN
= FIXTURE TO BE REMOVEDTURQUOISE
PL = PROPERTY LINE BASED ON COUNTY APPRAISAL
INFORMATION
PINK = REPLACE WITH NEW POLE AT NEW HEIGHT
= INDICATES NEW SECURITY FENCE
3856 Falmouth Rd
MA6-221
3856 Falmouth Rd
Marstons Mills, MA
RCSJDH
AWD
v2 211108
âBank of America
SCALE: 1/2" = 1'-0"
SCALE: 1/2" = 1'-0"
SCALE: 1/2" = 1'-0"
NOTE: THIS LIGHTING PLAN ILLUSTRATES ILLUMINATION LEVELS CALCULATED FROM
LABORATORY DATA UNDER CONTROLLED CONDITIONS IN ACCORDANCE WITH ILLUMINATING
ENGINEERING SOCIETY OF NORTH AMERICA (IESNA) APPROVED METHODS. ACTUAL SITE
ILLUMINATION LEVELS AND PERFORMANCE OF LUMINARIES MAY VARY DUE TO VARIATIONS
IN WEATHER, ELECTRICAL VOLTAGE, TOLERANCE IN LAMPS AND OTHER RELATED VARIABLE
FIELD CONDITIONS.
SCALE: 1/2" = 1'-0"
LANDSCAPE
FULL SITE CALCS DIMENSIONS
COMPLIANCE AREA
GC TO VERIFY WITH LOCAL AUTHORITY HAVING JURISDICTION ON TREE TRIMMING
AND/OR REMOVAL PRIOR TO COMMENCING WORK
FULL SITE CALCS
Label CalcType Units Avg Max Min Avg/Min Max/Min
FULL SITE @ GRADE Illuminance Fc 2.52 29.1 0.0 N.A.N.A.
UNIT CALCS 50'
Label CalcType Units Avg Max Min Avg/Min Max/Min
ATM2 & AHD 50' @ 36''Illuminance Fc 6.05 38.2 2.6 2.33 14.69
LOBBY 50' @ 36''Illuminance Fc 7.90 20.9 2.9 2.72 7.21
YA3
YA1
YA2
YE1 YE1
YE2
YE2
YE2
Y1
Y2DV1
EK1
AR1
YA4
YA4
LOBBY/ASSOCIATE ENTRY
ATM1
AHD ATM2
PL PL PL PL PL PL
YI1
SG1
Y3
EK2
Y3 Y3
YC1
SG1
SL1
SG1Y3
AT1 (NEW POLE)AT1 (NEW POLE)
SJ1
SJ1
0.0 0.1 0.1 0.1 0.2 0.3 0.6 1.0 1.4 2.0 2.7 2.8 2.4 2.0 2.1 2.3 2.3 2.6 2.5 2.0 1.5 0.9 0.5 0.3 0.2
0.0 0.1 0.1 0.1 0.2 0.4 0.8 1.4 2.1 3.5 3.6 3.9 4.3 3.4 3.6 3.6 3.8 4.2 3.4 3.1 1.9 1.2 0.7 0.4 0.2
0.0 0.1 0.1 0.2 0.3 0.5 0.9 1.8 2.9 4.0 6.5 6.7 5.5 6.6 4.3 5.8 5.9 6.7 5.7 3.7 2.4 1.4 0.8 0.4 0.2
0.1 0.1 0.1 0.2 0.3 0.6 1.0 1.9 3.7 5.2 8.1 7.9 7.2 7.2 7.4 8.6 9.2 7.0 6.0 3.7 2.6 1.6 0.2 0.2 0.1
0.1 0.1 0.1 0.2 0.4 0.7 1.2 1.9 4.4 8.3 11.9 8.0 11.9 3.6 7.8 5.8 3.9 0.3 0.4 0.4 0.5 0.2
0.1 0.1 0.2 0.3 0.5 1.0 1.6 2.1 1.5 3.7 3.9 8.6 6.5 3.3 0.6 0.6 0.8 0.6 0.2
0.1 0.2 0.3 0.4 0.7 1.4 2.8 2.3 7.3 4.5 1.4 0.8 0.7 0.8 0.8 0.1
0.2 0.3 0.4 0.6 0.9 2.1 4.3 2.9 6.8 4.5 1.6 1.0 0.8 0.8 0.7 0.1
0.2 0.4 0.6 0.8 1.3 2.5 4.7 5.8 5.7 4.0 4.2 11.8 29.1 10.7 2.9 3.1 2.9 6.3 4.1 1.9 1.2 0.9 1.0 0.7 0.2
0.3 0.5 0.8 1.1 1.6 2.6 3.8 5.0 5.0 3.9 5.3 10.5 17.5 11.4 3.5 3.6 4.4 5.1 3.7 2.2 1.5 1.0 0.8 0.7 0.3
0.4 0.7 1.0 1.7 2.5 2.7 3.6 4.1 4.0 4.4 4.9 5.4 6.3 5.2 4.5 4.8 4.2 4.8 3.2 2.4 1.1 0.7 0.6 0.5 0.3
0.4 0.9 1.4 2.3 2.8 3.6 3.7 3.8 3.9 4.7 5.1 5.1 4.9 4.3 4.2 4.0 4.4 3.7 3.0 2.0 1.4 1.0 1.0 0.7 0.3
0.5 0.9 1.5 2.3 3.5 3.1 4.1 3.3 3.5 4.4 4.8 4.4 4.0 3.9 3.5 3.2 2.9 2.8 2.0 1.4 1.1 0.8 0.9 0.8 0.1
0.4 0.8 1.4 2.5 3.0 4.0 3.5 3.4 2.9 3.9 4.5 4.2 3.9 3.9 2.8 2.1 1.9 1.7 1.3 1.0 0.8 0.7 0.8 0.6 0.1
0.4 0.7 1.1 1.7 2.6 2.6 2.8 2.4 2.2 3.1 2.9 2.7 3.2 2.6 2.2 1.4 1.2 1.0 0.8 0.6 0.6 0.6 0.8 0.7 0.1
0.3 0.5 0.8 1.1 1.6 1.9 1.8 1.4 1.3 1.2 0.8 0.8 0.7 1.0 1.1 0.7 0.6 0.5 0.4 0.4 0.4 0.6 0.7 0.6 0.3
YA3
YA1
YA2
YE1 YE1
YE2
YE2
YE2
Y1
Y2DV1
EK1
AR1
YA4
YA4
LOBBY/ASSOCIATE ENTRY
ATM1
AHD ATM2
PL PL PL PL PL PL
YI1
SG1
Y3
EK2
Y3 Y3
YC1
SG1
SL1
SG1Y3
COMPLIANCE AREA
50' RADIUS
COMPLIANCE AREA
50' RADIUS AT1 (NEW POLE)AT1 (NEW POLE)
SJ1
SJ1
6.9 3.6 6.4 8.1 3.8 4.8 5.1 4.8 5.6 21.1 37.7 38.2 22.1 4.9 2.6 2.6 3.3 3.9 3.9 6.5 6.9 6.1
4.9 5.6 5.0 6.1 4.4 4.9 5.1 5.7 6.7 15.1 23.3 19.6 19.5 5.9 3.1 3.2 4.0 4.4 4.5 6.2 6.0 5.7
4.0 4.4 3.6 4.4 4.5 4.9 6.3 6.4 7.5 14.4 19.9 14.4 19.3 5.7 3.4 3.6 4.2 5.2 6.1 7.0 6.5 5.4
3.8 3.6 4.4 4.5 5.4 6.9 5.5 6.2 8.5 4.2 4.3 4.6 2.6 3.3 3.6 4.3 6.2 5.8 5.6 6.3
3.7 3.7 4.3 4.7 5.2 6.9 6.5 6.8 7.0 5.5 5.5 5.0 4.7 4.5 4.5 4.8 6.1 5.9 5.6 6.1
3.7 4.2 5.0 5.2 5.9 6.7 6.6 5.6 5.2 4.8 4.2 4.2 4.2 4.5 4.8 5.3 6.1 6.3
3.9 4.5 5.3 5.1 5.0 5.1 5.3 5.2 4.3 3.9 3.8 3.8 4.0 4.5 4.5 4.3
3.9 4.7 5.3 5.1 5.1 5.1 4.5 4.0 3.7 3.7 3.4 3.3 3.5 3.9
4.2 5.2 5.1 4.7 4.6 4.2 3.8 3.9 3.9 3.1 2.7 2.6
5.7 4.7 4.5 4.2 4.3 4.5 3.7 2.8
5.6 6.3 5.9 5.6 5.4 4.4 3.7 3.6 3.6 3.9 4.2 4.0 4.9 5.3 5.9 5.7
6.1 7.9 8.3 8.4 7.1 5.8 5.7 5.1 2.9 4.8 5.1 5.3 5.9 5.7 7.1 8.0 7.9 6.9
7.0 8.4 7.9 9.3 9.2 4.9 3.1 3.9 5.2 7.1 7.4 7.6 8.2 7.9 8.9 7.6 6.6 7.5
5.0 7.0 9.2 4.3 10.5 10.1 8.3 9.0 5.0 8.6 10.2 9.9 9.9 12.1 9.7 9.5 8.3 7.1 7.8 5.9
6.5 7.6 9.7 6.0 12.2 11.0 10.8 9.2 9.4 13.8 13.8 10.0 9.2 9.4 8.8 7.1 4.8
10.6 12.1 13.6 5.2 10.5 10.2 12.4 17.3 5.2 8.2 8.2 7.7 6.2 5.0
10.9 18.0 16.3
20.9
YA3
YA1
YA2
YE1 YE1
YE2
YE2
YE2
Y1
Y2DV1
EK1
AR1
YA4
YA4
LOBBY/ASSOCIATE ENTRY
ATM1
AHD ATM2
PL PL PL PL PL PL
8'±
1'-6"±13'-6"±8'±4'±1'±
1'-6"±1'-6"±4'±3'±13'-6"±14'±
YI1
SG1
Y3
EK2
Y3 Y3
YC1
SG1
SL1
SG1Y3
AT1 (NEW POLE)AT1 (NEW POLE)
SJ1
SJ1
YA3
YA1
YA2
YE1 YE1
YE2
YE2
YE2
Y1
Y2DV1
EK1
AR1
YA4
YA4
LS1LS1
LS1
LS1
LS2
LS2
TR1
TR1
TR1
TR2
TR2
TR2
LOBBY/ASSOCIATE ENTRY
ATM1
AHD ATM2
PL PL PL PL PL PL
YI1
SG1
Y3
EK2
Y3 Y3
YC1
SG1
SL1
SG1Y3
AT1 (NEW POLE)AT1 (NEW POLE)
SJ1
SJ1
LUMINAIRE SCHEDULE **SEE FIXTURE CLARIFICATION NOTE #9 (NP) = NEW POLE (CBO) CONTROLLED BY OTHERS
QTY LABEL
1 AR1
2 AT1 (NEW POLE)
3 DV1
1 EK1
1 EK2
3 SG1
2 SJ1
1 SL1
1 Y1
1 Y2
4 Y3
1 YA1
1 YA2
1 YA3
2 YA4
1 YC1
2 YE1
3 YE2
1 YI1
NOTES
REPLACE EXISTING FIXTURE
ADD NEW POLE AND FIXTURE
REPLACE EXISTING FIXTURE
REPLACE EXISTING FIXTURE
ADD NEW FIXTURE - MATCH EXISTING CANOPY HEIGHT
ADD NEW FIXTURE
ADD NEW FIXTURE
ADD NEW FIXTURE
OUT OF SCOPE
OUT OF SCOPE
OUT OF SCOPE
OUT OF SCOPE
OUT OF SCOPE
OUT OF SCOPE
OUT OF SCOPE
OUT OF SCOPE
OUT OF SCOPE
OUT OF SCOPE
OUT OF SCOPE
MOUNTING HEIGHT
MATCH EXISTING
18' AFG
MATCH EXISTING
MATCH EXISTING
9' - 6'' AFG
12' AFG
8' AFG
12' AFG
-
-
-
-
-
-
-
-
-
-
-
APPROVAL PRIOR TO INSTALLATION. BANK MUST HAVE LANDLORD AGREE
TO LEAVE FIXTURES ON ALL HOURS OF DARKNESS.
LIGHTING IS REQUIRED FOR COMPLIANCE AND WILL REQUIRE LANDLORD1.
SITE NOTES:
EXISTING POLES - SQUARE - STEEL
EXISTING POLE BASES - 3'
EXISTING DRIVE THRU CEILING - HARD
2.
3.
1.
EXISTING CONDITIONS:
TR1
TR2
LS1
LS2
3
3
-
2
REMOVE TREE AND REPLACE OUTSIDE OF COMPLIANCE
TRIM LANDSCAPING DOWN TO 36"
REMOVE LANDSCAPING AND REPLACE WITH LANDSCAPING THAT CAN BE MAINTAINED AT 36"
TRIM TREE UP TO 10' AND THIN OUT TREE CANOPY
QTY NOTES
LANDSCAPE SCHEDULE CM = CRAPE MYRTLE UNK = UNKNOWN
SYMBOL
P:\2021\Bank of America\Design\2021 ELP\MA\Marstons Mills (MA6-221) - 3856 Falmouth Rd\Active\CAD - MA6-221 - V2 - 211108 - RCS.dwg, 11/9/2021 9:54:16 AM, AutoCAD PDF (General Documentation).pc3